Accurate Multi Channel Peristaltic Pump Multistage Accuracy Timing Quantitative Filling Liquid Pump Support RS485 MODBUS

Features: 

• Can be controlled separately
• Can be controlled by groups
• Concentrated sulfuric acid
• can be pumped Organic solvents can be pumped
• In the video, 30 pump heads are online, and up to 200 pump heads /channes can be customized,
• Support RS485 MODBUS RS232
• The pump head can be made of nylon and PC. The nylon pump head is more corrosion-resistant and high-temperature resistant

Above picture is the difference modes for your checking

Different Modes introduction

1. Speed regulation mode
Adjustable motor speed (0.1-500.rpm)
At the same time, the corresponding flow rate at this speed is displayed

2. Quantitative mode (error 1%)
The specified volume of liquid (0.01-9999.99m1) can be output

3. Timing quantitative mode
Example: output 8.88m1 liquid every 6.6 seconds,
End after 9999 consecutive outputs

4. Timing mode
Example: every 6 seconds, run for 9 seconds at the speed of 8ml / min, and end after 9999 consecutive runs

5. Calibration mode

It can be calibrated according to the motor speed, and the liquid volume can be output according to this speed when quantifying, and the flow rate is calculated from this

6. Mixed mode
Different pumps are in different modes at the same time. For example, while pump A regulates speed, pump B outputs quantitatively

7. Automatic pump finding
Like TV station, the central control needs to find the pump to communicate with it normally

8. Modify pump name
Pump name supports English / letters / numbers

9. Group control, recipe management
The pump can belong to different groups and can be started and stopped / positive and negative at the same time under each mode
Formula: in the quantitative mode, a group is a formula, and the quantitative volume of each pump is memorized separately (set by you)
Example: color formula
Pump a pumps red pigment, pump B pumps green pigment, and pump C pumps blue pigment
Formula group 1: 1ml for pump A, 2ml for pump B and 3ml for pump C
In the quantitative mode, press the number 1 on the keyboard to select this formula, and then press the "start-stop" keyboard to start the formula output

10. View parameters
You can view the relevant parameters of the pump and modify the time unit

Above is the model options, we take model 08 as a sample to specify its parameters below:

• Rollers : 3
• Pump head material : Nylon
• Color: Black
• Squeezing tubing and size : ID6.4*9.6 Silicon Tube
• Tube charactors: can only resist a very weak corrosive liquid, service life is over 200 hours.
• Flow rate : 0.15-610ml/min
• Coming 2 meters tubing material : ID7*OD10mm ，silicon tube for external transfer.

Welcome to send us messages if you are interested in other models but unclear there. 

• Note: the price is only for one channel,. for example: if you need 4 channels, then add 4 pcs to your cart, then add a central control. 

Packing: 

• Pump channel * 1 ( or 2 or 3 or 4... according to the pcs you order)
• Central controller *1 pcs
• Power supply *1 pcs( AC110-240V available)
• Silicon tubing *2 meters ( for each channel)